Spending all your day gathering sticks for a hot shower is just no fun. No fun at all. Mind you, anything that results in a hot shower (or even better, a hot bath) has to be considered a priority at Milkwood.
So when Nick finished converting the old ‘Sunbeam Sheep Shower’ structure (basically a new-fangled sheepdip) to a shower block with a little wood-fired, home-made firebox thingamy to heat the water for the shower and the bath, that’s what we did. Lots of stick-gathering.
The romance of wood-fired hot water quickly wears thin, however, if your water-heating system is not terribly efficient. Because this means the system requires a fair deal of wood to heat the water, which therefore releases a corresponding amount of CO2.
And also results in lots of stick gathering. So Nick went searching for the most super-efficient, super-simple and super-funky heating system idea he could find, which could then be converted to a water heating system. And thus we discovered the glory that is the Rocket Mass Heater.
The basic premise of a Rocket Mass Heater is that the heat energy of a small, very hot-burning fire is used in a optimal way to get the utmost out of that heat energy. Hyper efficiency with minimal fuel input.
Ianto Evans + Leslie Jackson, a couple of Permies who are prettymuch gurus on this subject, put together a great little book called Rocket Mass Heaters and this was our inspiration and guidebook for our project.
The heat of the small fire is drawn up through a vertical heat riser of some kind, which creates an updraft and therefore causes the fire to burn extremely hot. A hotter burn means less smoke. And less smoke means more hot water per handful of sticks.
Then the hot gases in the riser is put to work – pushed (or pulled) under hot plates, past water boilers, underneath cobb benches, through thermal mass walls – wherever you need to heat. By the time the hot gases make their way out to the outside world, they are spent, and much cooler – the heat energy has been transferred along the way to whatever needed to be heated. Hurrah!
Rocket Stoves are quickly catching on in various places around the globe – because they’re so fuel efficient, for example, they’re being used in development aid projects where fuel is scarce. And because they’re super simple, they can be made by prettymuch anyone with a need, a plan and some simple tools.
There’s a stash of great Rocket Stove projects that have been done around the world at RocketStoves.org.
But back to us at Milkwood. The making of our Rocket-Powered water heater took two days for two blokes. The above diagram explains it all pretty well. Firebricks in a pattern with a burn chamber in front, topped by an insulated heat riser, topped by a small heat exchanger, topped by a chimney.
The water came in one end of the system from the bottom of the water tank, then passively circulated between the heat exchanger and the hot water tank (just a normal hot water tank like you would have on your normal western hot water system) once the fire was going via simple pipes and the power of convection.
A handful of sticks in the burn chamber set the fire going. Then we waited and finally turned on the shower tap and… voila. Steaming hot water for one shower. Hoo-bloody-ray.
Post-wash, the water flows into a greywater trench which waters a planting of She-Oaks (Casuarinas) downhill from the showerblock. These will, in time, yield excellent stickwood for the fire, as Casuarina wood is some of the hottest burning wood in the world.
Which is the closest we’ll come to closing the loop (in terms of energy, carbon and responsibility) on our daily shower anytime soon… which makes for a very happy shower.
Here’s a Flickr set of the construction process – it should give you a good idea, it’s fairly thorough. Feel free to ask questions if you like, I’m sure Nick would love to wax lyrical about his beloved Rocket construction.
So viva la Rocket Stove. These things are hyper-efficient. They should take over the world, I rekon – what is a better beacon for sustainable, responsible living than a guilt-free hot bath?
**Notes on this system for safety: you want a pressure release valve on the hot water tank (most have them on already) so the water tank doesn’t explode, and also a tempering valve on the hot water outlet (so no water hotter than 60º comes out), so that no-one burns themselves during their lovely wood-fired shower.
Related posts:
Thursday 29 September 2011
The Rocket-Powered Shower « Milkwood: permaculture farming and living
via milkwood.net
